Butterfly parts, prices, and information are available from:

This parts list is provide by www.butterflyer.org as a service to current and prospective Butterfly owners as a guide to the parts of the boat and its accessories. Because of the volitility of prices and availability throughout the marine industry, please contact a Butterfly dealer for current prices and ordering information.

Butterfly Parts


			Specifications subject to change without notice


Item	Description	Item	Description
1	BUTTERFLY HULL ASSEMBLY	47	mast base
2	vinyl rub rail	48	stay set
3	vinyl trim cap	49	side stay, with tang (2)
3A	panhead tapping screw 1" x 8	50	forestay, with hound
5	hull name, Butterfly	51	tang bolt hexhd mch scr 1/4-20 x 2 1/2"
6	bow fitting	52	nylock nut 1/4 - 20
7	panhead machine screws 10-24 x 1" (4)	53	shroud adjuster (3)
8	shroud anchor plate (2)	54	clevis pin and ring, set of 3
9	panhead machine screws 1/4-20 x 1" (4)	55	BOOM ASSEMBLY, without gooseneck
10	mast step	56	extrusion, boom
11	panhead tapping screws 1" x 10 (3)	57	outhaul casting
12	spray rail	58	st. st. poprivets (2)
13	ovalhead tapping screws 3/4" x 8 (13)	59	eyestraps, block (3)
14	daggerboard snubber kit	60	st. st. poprivets (6)
15	caps (2)	60A	clamcleat, outhaul
16	spacers (2)	60B	ovalhead tapping screw 3/4" x 8 (2)
17	rubber blade (2)	61	gooseneck casting
18	ovalhead tapping screws 3/4" x 8 (8)	62	st. st. poprivets (4)
19	hand rail (2) with spacers (4)	63	gooseneck assembly
20	handrail spacers (4)	64	clevis pin and ring, gooseneck
21	panhead machine screws 1/4-20 x 1 1/2"	65	DAGGERBOARD ASSEMBLY
22	bridle eyestrap	66	daggerboard bumpers, with bolt and nut
23	bridle w/ shackles	67	RUDDER AND TILLER ASSEMBLY
24	gudgeon bracket	68	rudder head assembly
25	panhead machine screws 10-24 x 1" (4)	69	tiller reinforcer
26	lockwasher 10 (4)	70	panhead machine screw 5/16 - 18 x 2"
27	drain plug assembly	71	nylock jam nut 5/16 x 18
28	panhead tapping screws 1" x 10 (4)	72	pintle, upper
29	MAST ASSEMBLY	73	panhead machine screw 8-32 x 1 1/4"
30	upper mast assembly	74	panhead machine screw 8-32 x 1/2"
31	extrusion, upper mast	75	nylock nuts 8-32 (2)
32	mast head	76	safety ring
32A	clam cleat, halyard	77	pintle, lower
32B	ovalhead tapping screw 3/4 x 8	78	panhead machine screws 8-32 x 1 1/2"
33	st. st. pop rivets (2)	79	panhead machine screws 8-32 x 1/2"
34	splice half	80	nylock nut 8-32 (3)
35	st. st. pop rivets (4)	81	safety spring
36	lower mast assembly	82	panhead machine screw 8-32 x 1/2" (2)
37	extrusion, lower mast	83	rudder disc
38	splice half	84	rudder friction disc
39	st. st. poprivets (4)	85	ovalhead machine screw 1/4-20 x 1 1/2"
40	internal reinforcer	86	nylock nut 1/4 - 20
41	st. st. poprivets (4)	87	rudder blade
42	halyard cleat	88	rudder spring
43	ovalhead tapping screws 3/4" x 8 (2)	89	panhead machine screws 8-32 x 3/4"
44	downhaul cleat	90	nylock nut 8-32 (2)
45	flathead machine screws 8-32 x 3/4" (2)	91	tiller and extension assembly
46	square nuts 8-32 (2)	92	tiller
Item	Description	Item	Description
93	tiller stop	142	panhead tapping screws 1 x 14 (6)
94	tiller friction plate	143	Harken Hexarachet
95	tiller extension	144	Harken Swivel base and spring
96	panhead tapping screws 1" x 10 (2)	145	flathead machine screws 8-32 x 1" (4)
97	retainer, tiller extension	146	nylock nut 8-32 (4)
98	flathead tapping screw 1 1/2" x 6	147	swivel camcleat
99	Sail, all white	148	flathead machine screw 8-32 x 1/2"
100	Sail, colored, Rainbow	149	nylock nut 8-32 (3)
101	Sail, colored, Blue Chip	149A	Telescoping Tiller Extension 27" - 47"
102	Sail, colored, Fiesta	149B	Seitech Dolly (beach trailer)
103	Sail, colored, White with Spectrum Panel	149C	Extrasport Life Vest U.S.C.G XS - XL
103A	batten set		Old Style Parts
104	batten, upper, 20"	150	upper gudgeon, vinyl trim cap, OS
105	batten, middle and lower, 24" (2)	151	ovalhead machine screws 8-32 x 1" (4)
106	sailbag	152	nylock nut 8-32 (4)
107	sail numbers (each)	153	lower gudgeon, OS
108	RIG PACK	154	ovalhead machine screws 8-32 x 1" (2)
109	mainsheet line 5/16" x 34'	155	RUDDER AND TILLER ASSEMBLY, OS
110	blocks, mainsheet and traveller (3)	156	rudder head assembly, OS
111	halyard line 3/16" x 36'	157	pintle, upper
112	halyard shackle	158	panhead machine screws 8-32 x 1 1/4"
113	outhaul line 3/16" x 7'	159	nylock nut 8-32 (2)
114	downhaul line 3/16" x 3 1/2'	160	safety ring
115	Owner's Manual	161	pintle, lower
	Accessories	162	panhead machine screw 8-32 x 1 1/2"
116	deck cover	163	panhead machine screw 8-32 x 1/2"
117	spar bag	164	nylock nut 8-32 (2)
118	padded board bag	165	safety spring
119	hiking strap	166	panhead machine screw 1/4 - 20 x 2 1/2"
121	inspection port	167	rudder disc
122	flathead tapping screws 1/2" x 6 (6)	168	rudder friction disc
123	storage bag, regular (use with port)	169	ovalhead machine screw 1/4-20 X 1 1/2"
124	storage bag, large (use with port)	170	nylock nut 1/4 - 20
125	wind direction indicator, telo spar fly	171	rudder blade
126	air flow tells	172	rudder spring
127	adjustable outhaul kit	173	panhead machine screws 8-32 x 3/4"
128	clamcleat	174	nylock nut 8-32 (2)
129	ovalhead screws 1" x 8 (2)	175	tiller and extension assembly, OS
130	outhaul line	176	hexhead machine screw 1/4 - 20 x 2 1/2"
131	Boom Vang Assembly	177	nylock nut 1/4 - 20
132	boom vang arm	178	tiller, OS
133	roundhead machine screw (2)	179	tiller stop
134	rod nuts (2)	180	tiller extension, OS
135	block, v jam	181	trusshead machine screw
136	clevis pin and ring	182	nylon washer 1/4
137	boom vang hook	183	st. st. washer 1/4
138	block	184	nylock nut 1/4 -20
139	shackle	185	shroud anchor plate, channel style, OS
140	boom vang line, 1/4" x 9'	186	panhead machine screws 10-24 x 1" (4)
141	mounting bracket for s. cleat or ratchet block
Notes:	Older Butterflys with serial numbers 8011 and below use the Old Style (OS) Rudders system.
	Older Butterflys may use a channel style shroud anchor plate (OS)
	A part includes indented parts listed below it. All prices are for a quantity of one